introduction
Disc diffuser aerator is used to transfer air and with that oxygen into sewage or industrial wastewater. Oxygen is required by microorganisms in the water to break down the pollutants. disc diffuser aerators produce a plethora of very small air bubbles which rise slowly from the floor of a wastewater treatment plant or sewage treatment plant aeration tank and provide substantial and efficient mass transfer of oxygen to the water. The oxygen, combined with the food source, sewage, allows the bacteria to produce enzymes which help break down the waste so that it can settle in the secondary clarifiers or be filtered by membranes.
Structure and features
1.The side sealing structure prevent the film fall off.
2.good seismic sealing
3.double check design to prevent reverse flow.
4.diaphragm center and around the thickening to prevent the diaphragm tear.
technical parameters
|
Model |
HYBQ-215 |
HYBQ-260 |
HYBQ-300 |
|
Bubble Type |
Fine bubble |
Fine bubble |
Fine bubble |
|
Moc |
EPDM+ABS |
EPDM+ABS |
EPDM+ABS |
|
Connector |
3/4 NPT |
3/4 NPT |
3/4 NPT |
|
Bubble Size |
1-2mm |
1-2mm |
1-2mm |
|
Flow Range |
1-6m³/h |
1-8m³/h |
1-12m³/h |
|
Slit Quantity |
5000 |
9000 |
11000 |
|
Service Area |
0.2-0.64m² |
0.25-1m² |
0.4-1.5m² |
Applications
1.Can be used in wastewater treatment plant, such as city sewage plant.
2. Also used for mixing oxygen/ozone into water and so on.
Our Factory
Workshop
