The treatment capacity of the sludge dewatering screw machine is controlled within an appropriate range, which is adjusted in combination with the sludge flow rate, the flocculant flow rate and the difference degree to avoid frequent fluctuations of the equipment due to sudden load increase and affect the treatment effect, and at the same time Can achieve greater equipment processing efficiency.
The sludge concentration of the sludge dewatering screw machine should be adjusted in time to adjust the flocculant flow rate and the differential speed. It is necessary to ensure the treatment effect and avoid waste; the sludge flow rate increases or the sludge concentration increases, the flocculant flow rate increases, and the differential speed corresponds. Increase, the sludge flow rate decreases or the sludge concentration decreases, the flocculant flow rate is reduced, and the differential speed is reduced accordingly.
Sludge dewatering screw machine flocculant is not the best, only the most suitable, in the operation depends mainly on the type of equipment structure and operating conditions, only the best combination of the three to achieve the lowest flocculant consumption The best processing results and the highest processing efficiency.