Characteristics of the new device of stacked screw sludge dewatering machine

Characteristics of the new device of stacked screw sludge dewatering machine

Jun 21, 2020

Today, I will take you to understand the characteristics of the new automatic cake unloading device of the stacked screw sludge dewatering machine:   

1. The sliding filter cloth rack of the sheave and the shaking mechanism are ingeniously combined to strengthen the function of unloading the cake and make the automatic cake unloading more adequate. 


2. The outstanding advantage of the flexible transmission system is that it does not affect the normal process of unloading the cake even when the filter plate is inclined, and it will not cause deformation of other structural parts. It is a highly reliable transmission system.  

3. There is no need to remove the hinged steel plate or the blocking of the vibration beam when replacing the filter plate normally. After moving the flexible steel wire rope (composed of steel wire, rope core and grease), the filter plate can be easily lifted, creating a good working condition for maintenance .  

4. Fully taking into account the basic requirement of frequent replacement of filter cloths in daily operation, the innovative design of the pressure tube filter cloth assembly rack makes it very convenient to replace filter cloths.  

5. Uninterrupted automatic cake unloading is completely achieved, unnecessary manual pause is removed, and the cake unloading time is reduced from 30min to 20min.  

6. Workers no longer use the shovel cake board, which eliminates the abnormal accidents that pierce the filter cloth and increases the duration of use of the filter cloth.  

7. After the filter is formed, it can wash the working surface of the filter cloth and the slurry remaining on the convex tip of the filter plate surface to ensure the regeneration of the filter cloth and the smooth passage of the filtrate.  

8. Convenient modification. There are no major changes to the original equipment, only the cake unloading device is attached to the original equipment, and it has a wide range of adaptation. It can be used for the modification of rubber, polymer, cast iron and other filter plates.