Dewatering effect and operation requirements of screw press sludge dewatering machine

- Jul 02, 2019-

Screw press sludge dewatering machine needs to be combined with torque data to determine the preferred differential speed value range. In principle, use lower differential degrees to achieve better results without causing centrifuge blockage and processing capacity. Treatment effect and saving flocculant consumption.

The on-site management of the screw press sludge dewatering machine and the work of the operators are: continuous observation, timely adjustment and good at summarizing, and seeking the perfect coordination of all working conditions with good parameters in the possible changes. . Under normal circumstances, this observation and adjustment should be carried out once for 1 to 2 hours. It is necessary to strictly avoid the situation that the operating parameters of the equipment are kept for a long time or a shift without any adjustment after the start-up. The operators on site are lazy or responsible. Not strong is one of the main reasons for the long-term operation efficiency of sludge dewatering workshop, fluctuation of treatment effect and waste of medicine consumption.

Screw press sludge dewatering machine often detects the dewatering effect of the dewatering machine. If the separation liquid (or filtrate) is found to be turbid and the solids return rate is reduced, the cause should be analyzed in time, and measures should be taken to solve the problem. The effect of sludge dewatering is often observed. If the solid content of the mud cake is reduced, the analysis should be based on