Monitoring project during operation of sludge dewatering equipment

- Sep 08, 2018-

Nowadays, most of the sludge dewatering equipments are fully automatic, and there is no need for manual random manual operation for sludge treatment. Therefore, large and medium-sized sludge disposal using sludge dewatering equipment often requires only one staff member in multiple production lines. Of course, during the operation of the sludge dewatering equipment, it is necessary to carry out some necessary monitoring to control the sludge dewatering effect and equipment operation in time.


First, the turbidity of the sludge filtrate and the appearance of the sludge cake in the sludge dewatering equipment should be observed regularly. Under normal circumstances, the sludge treated by the sludge dewatering equipment forms a dry hard cake and is non-tacky. And do a good job of analysis and record, regularly test the moisture content of the mud cake after sludge treatment, cycle time record, see if the sludge dewatering equipment runs in the set sludge treatment cycle, whether it reaches the established sludge moisture content, pollution Whether the mud dehydration is thorough.


Also, don't forget to check the degree of wear of the easy-to-grind parts of the sludge dewatering equipment. The ordinary sludge filter press is easy to wear because the filter plate is made of polypropylene. It should be inspected regularly to avoid the effect of sludge dewatering due to deformation and damage of the filter plate. During the operation of the sludge dewatering equipment, the above tests can be done to effectively improve the sludge dewatering efficiency and improve the sludge dewatering treatment effect.