Sludge dewatering machine treatment wastewater

- Jul 08, 2019-

The treatment capacity of sludge dewatering machine in the process of working waste is controlled within the appropriate range, combined with sludge flow rate, flocculant flow rate and difference degree to avoid frequent fluctuations and influences of equipment overload caused by sudden increase of load. The processing effect can achieve large device processing efficiency at the same time.


The sludge concentration of the sludge dewatering machine should be adjusted in time to adjust the flow rate and the differential speed of the flocculant. It is necessary to ensure the treatment effect and avoid waste, increase the sludge flow rate or increase the sludge concentration, and increase the flow rate of the flocculant. The speed is correspondingly increased, the sludge flow rate is decreased or the sludge concentration is decreased, the flow rate of the flocculant is reduced, and the differential speed is correspondingly reduced.


The flocculant used in the sludge dewatering machine to treat wastewater is not good, only suitable. The type and consumption of flocculant depends on the matching of the quality of the agent and the nature of the sludge, and also depends on the type of equipment and the operating conditions. The three get a good combination of operation to achieve better processing results and high processing efficiency with lower flocculant consumption.

https://www.hy-sewagetreatment.com/