The introduction of superfluous screw sludge dewatering machine completely replaces other domestic dewatering machines. It is mainly applied to the dewatering of organic sludge and can effectively solve the problem of dehydration of oil-containing sludge. Then, when using a superfluous sludge dewatering machine, what should we pay attention to?
Before using the superfluous sludge dewatering machine to drive, it is necessary to rotate the number of turns in order to check the conditions of the transition. When the superfluous sludge dewatering machine starts normal operation, the opening and closing arms cannot be braked to avoid damaging the Lanling belt and other parts.
When adding material to the superfluous screw sludge dewatering machine, it must be evenly distributed; and no items can be placed on the top cover of the machine. At the same time, the machine must be regularly overhauled and filled with lubricant. At least once every six months So that it can always maintain a good working condition.
As an operator of the superfluous screw sludge dewatering machine, it is necessary to be familiar with the structure, performance and operation method of the machine, so as to be able to better use it and provide an effective solution for the sewage treatment. The key point to explain is the operation method of the superfluous screw sludge dewatering machine, which is relatively simple.
The first step is to place the material to be dehydrated evenly and evenly into the ladle of a superfluous sludge dewatering machine, paying attention to balance, uniformity, and overload. After about 90 seconds to start the motor, the machine has reached normal operation, and the outlet pipe starts to discharge a lot of water. Wait for about 6-8 minutes to run, the water outflow is basically no water outflow, this time you can cut off the power; and after 1-2 minutes, slowly brake the open and close arms several times so that the machine stops.