What should I do if the stacked screw sludge dewatering machine is suddenly interrupted?

- Jul 15, 2019-

The stacked screw type sludge dewatering machine integrates automatic control cabinet, flocculation and tempering tank, sludge concentration and dehydration body and sump, which can realize high-efficiency flocculation under continuous operation and continuous sludge concentration and Press dehydration work.


What should I do if there is a sudden interruption in the operation of the stacked screw sludge dewatering machine?


First, immediately power off, and then check to see if there is a mechanical failure, check which part is broken. Replacement of the replacement, overhaul of the overhaul. Exclude all component reasons and restart the test.


If it is a general sludge dewatering machine, there is a button on the installation device. When the equipment encounters an emergency, you need to press the stop button immediately, so that the sludge dewatering machine stops running immediately, and if the situation is to be removed, Start the sludge dewatering machine, rotate it in the direction of the arrow on the emergency stop button, lift the button, and then restart the sludge dewatering machine.


In daily situations, you should pay attention to:


During the operation of the sludge dewatering machine, the operator must always pay attention to its operation. If the abnormality is found, immediately stop the problem and find out the cause. After the fault is removed, the machine can be restarted. Finally, check whether all the equipment is in the normal state and regularly lubricate the specified parts.