Sludge Treatment Equipment

Sludge Treatment Equipment

Sludge treatment equipment Introduction Sludge treatment equipment is mainly used n wastewater treatment industries, such as: municipal wastewater, waste water from food, beverage, chemical, leather industries, etc. especially for the sludge contains oil. Because of screw squeezing technology,...

Product Details

Sludge treatment equipment Introduction

Sludge treatment equipment is mainly used n wastewater treatment industries, such as: municipal wastewater, waste water from food, beverage, chemical, leather industries, etc. especially for the sludge contains oil.

Because of screw squeezing technology, the power consumption is very low, so that save running cost. Its difficult to be blocked, so the quantity of washing water will be greatly decreased. It can running continuously for 24 hours, so it has feature of lowest labor cost.


blob.png


Main Features of Sludge treatment equipment

1. Exclusive pre-thickening device enables a wide solid concentration ranging from 3000mg/l to 50000mg/l

2. Fixed and moving plates replace filter cloth, self-cleaning, clog-free, easy to handle oily sludge

3. Low running speed, low noise, low power consumption, 1 /8 of Belt Press and 1 /20 of centrifuge

4. Less capital construction cost, more excellent working performance

5. Fully automatic control, Easy operation and simple maintenance

 

Specifications of Sludge treatment equipment

Model

DS Sludge treating capacity

Sludge treating capacity(m³/h)

2000mg/L

5000mg/L

10000mg/L

20000mg/L

25000mg/L

50000mg/L



HNDL-101

3~5 kg/h

~1.5

~0.6

~0.5

~0.25

~0.2

~0.1

HNDL-131

6~10 kg/h

~3.5

~1.4

~1.0

~0.5

~0.4

~0.2

HNDL-201

9~18 kg/h

~4.5

~1.8

~1.5

~0.7

~0.6

~0.3

HNDL-202

20~30 kg/h

~10.0

~4.0

~3.0

~1.5

~1.2

~0.6

HNDL-301

40~60 kg/h

~19.0

~7.6

~6.0

~3.0

~2.4

~1.2

HNDL-302

75~120 kg/h

~37

~15

~12

~6.0

~4.8

~2.4

HNDL-303

115~175 kg/h

~58

~23

~18

~9.0

~7.0

~3.5

HNDL-351

90~120 kg/h

~33

~13

~10

~5.0

~4.0

~2.0

HNDL-352

180~240 kg/h

~63

~25

~20

~10

~8.0

~4.0

HNDL-353

270~360 kg/h

~93

~37

~30

~15

~12

~6.0

HNDL-401

120~160 kg/h

~48

~19

~15

~7.5

~6.0

~3.0

HNDL-402

200~300 kg/h

~92

~37

~30

~15

~12.5

~6.0

HNDL-403

300~450 kg/h

~142

~57

~45

~22

~18

~9.0

HNDL-404

400~600 kg/h

~182

~73

~61

~30

~24

~12

 

Product Structure

The main part of the dehydrator is a filter device that a screw runs through the stacked fixed rings and moving ring.
The small gaps between fixed rings and moving ring can filter the sludge, and the lumen between screw and rings is filled with polymer grains. The moving ring transfers the sludge to the end of the machine with pressure and extrudes sludge cakes.
The running of the screw drives the moving ring to clean the gaps and avoid jam.


blob.png


Product Advantage

1.Suitable for sludge dewatering of high/low consistency.

2.There is no need to worry about jam up. Reduce the cleaning water consumption.

3.The electrical cabinet, disposal tank and dehydrator are integrated, which reduces the covering area and brings convenience to installment.

4.The dehydrator is enclosed working, which reduces the bad smell and improves the working environment.

5.Automatically working for 24 hours, reducing the labor strength of workers.

6.The slow running speed of screw shaft reduces the power consumption and noise.

7. It is made with stainless, extending the service life.

8. It is convenient for daily maintenance.

 

Delivery site

blob.png

Inquiry